Forum Post: RE: Scalable Terrain Model - raster draping is not propagated to all Projectwise users

Adam, I may be wrong about this, but I did not think that you could display STM files in InRoads and that you must use Descartes to display STM files. In Descartes you can do Export an STM fie and create an TM in your DGN file. You can then attach your raster images and mark draping in Raster Manager and drape your raster images by selecting your TM element when you do the following steps in InRoads. 1.) Tools - visualization - materials - define materials. 2.) In the Material Editor go to palette - open and load dcdrape.pal 3.) You should see dcdrape listed in the material editor now. Expand it and then right click - assign and click on one of the triangles of your surface 4.) In the top left corner of your view click on the View Attributes button and change the display style to Smooth and the image will drape. Please look at the attached link. http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/extract-tm-from-stm In Descartes open 3D design file that STM file is attached. In Scalable Terrain Model highlight STM file and do File > Export STM to TM. You can then use the TM to create your TIN. To give the TM a name if required click on the TM and click on the "i" Element Information button and name the TM in the Element Info dialog in the General tab section. https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/14184.import-asc-dem-files-to-stm-tm-and-tin.aspx http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/f/343228/p/83261/306771#306771 If this is not what you are wanting can you attached screen shots of what you are seeing? Frank